Millermatic 251 MIG Wire Feed Welder
This product is no longer available. Please see similar products below
Features
Description
The Millermatic 251 is capable of welding materials from 22 gauge up to 1/2 in thick in a single pass. Active Arc Stabilizer technology provides excellent starts and line voltage compensation provides constant output with fluctuations in input power.
Specifications
| Rated DC Output: | 200 A, 28 VDC at 60% duty cycle 250 A, 28 VDC at 40% duty cycle |
| DC Amperage Range: | 30 - 300 A |
| OCV: | 38 V |
| Input at Rated Output: (60 Hz) |
230 V
42 A 575 V
17 A kVA
10 kW
7.7 |
| Wire Feed Speed: | 25 - 700 IPM |
| Weight: | 215 lb (98 kg) |
| Dimensions: | H: 32" (813 mm) W: 19" (483 mm) L: 39" (991 mm) |
| Wire Type and Diameter: | Solid Steel: .023 - .045" (0.6 - 1.2 mm) Stainless Steel: .023 - .035" (0.6 - 0.9 mm) Flux-Cored: .030 - .045" (0.8 - 1.2 mm) |
Additional Features
- Adjustable run-in control for optimized starts
- Spoolmatic 30A or 15A gun is directly connected with no extra module required
- Tip Saver shuts off weld output if tip is shorted to work surface
- Weld output shuts off if no arc is detected within 3 seconds after gun trigger is depressed
- Fan-On-Demand
- Self-calibrating digital meters
- Industrial, dual-gear-driven, cast aluminum drive system
Similar Products
Millermatic 252 MIG Wire Feed Welder
FreeeaMillermatic 252 MIG Wire Feed Welder
Millermatic 350P MIG Wire Feed Welder
FreeeaMillermatic 350P MIG Wire Feed Welder
Next Steps
Get the equipment you need – where you need it, when you need it
Ask a Question
Looking for some additional information? Connect with one of our experts to get the details you need.
Contact Sales
Need a quote to rent, lease or purchase equipment? Reach out to our sales team to get started.
Find a Location
Want to visit us at one of our 50+ service centers? Find the Red-D-Arc location closest to you.