Miller Maxstar 200 DX TIG Welder

This product is no longer available. Please see similar products below

Features

Superior Low-End DC TIG or High-End DC Stick Performance
Auto-Line Technology
Built-in Gas Solenoid and HF

Description

The Maxstar 200 DX TIG welder features Auto-Line technology, the most advanced inverter power management circuitry in the welding industry, allowing the end user to automatically connect to any input power, 120-460 volt, single- or three-phase.

Miller Maxstar 200 Series Spec Sheet

Specifications

Input Power:	115 to 460 Volt, 50/60 Hz, 1 Phase or 3 Phase
Rated DC Output (TIG):	175 A, 17 V at 60% duty cycle, three-phase 175 A, 17 V at 60% - 150 A, 16 V at 70% - 125 A, 15 V at 100% duty cycle, single-phase
DC Amperage Range:	1 - 200A (200-460VAC), 1 - 150 A (115VAC)
Maximum OCV:	75 V
Weight:	16.8 kg (37 lb)
Dimensions:	H x W x D: 343mm (13.5") x 191mm (7.5") x 445mm (17.5")
Product specifications and availability may vary by country

Additional Features

Built-in gas solenoid and HF means there are no additional accessories required. With 1-200 amps of welding output the Maxstar 200 Series provides the operator with superior low-end DC TIG or high-end DC Stick performance. The Maxstar 200 is built to function dependably under the most demanding conditions.

When the job demands greater control the DX provides pulse on/off, pulse frequency, peak % time, background amps, initial amps, initial slope time, final slope time, and final amperage control.

Applications